Zortrax M300 Dual 3D Printer ZORM300DUAL

M300 DUAL INCORPORATES ZORTRAX’S DUAL EXTRUSION LPD PLUS 3D PRINTING TECHNOLOGY INTO ITS LARGE VOLUME 3D PRINTER FOR INDUSTRIAL-GRADE RESULTS.

The Zortrax M300 Dual is a dual extruder, large volume desktop 3D printer that produces industrial quality models.  Thanks to its LPD Plus dual extrusion system that prints supports using water soluble material, the M300 Dual can handle 3D printing large models with intricate internal geometries. A single-extrusion mode is available for jobs where you decide water soluble supports are not needed, and when enabled, the printer performs just like a standard M300 Plus. The M300 Dual also features a blackout response system that automatically saves the position of the printing head in the event of a power failure, and resumes the print when power is restored.  M300 Dual offers users the option of printing on perforated, glass, or other compatible build-platforms, all of which can be automatically calibrated with its new capacitive displacement sensor. The M300 Dual prints with a range of dedicated Zortrax Z-Filament materials, and also fully supports third-party alternative materials in both dual and single extrusion modes.

ZORTRAX M300 DUAL FEATURES:

• LPD Plus dual-extrusion technology – allows for 3D printing with water soluble support material
  
• Large build volume – M300 Dual has a 265x265x300 mm workspace
• Wi-Fi, USB, and Ethernet connectivity
• Create wireless networks of M300 Plus 3D printers
• Manage multiple M300 Plus printer from one workstation
• Wireless file transfer
• Advanced remote monitoring
• Fail-safe 3D printing
  
• Blackout response system prevents failures if power is disrupted
  
• Advanced filament control automatically pauses a 3D print if the filament runs out, jams, or if the nozzle gets clogged
• Compatible with perforated, glass, and other build platforms – M300 Dual’s glass build plate allows for 3D printing without a raft, giving models a clean, smooth bottom surface. The perforated plate promotes the adhesion of the model to the build surface
• Capacitive displacement sensor calibration – automatically ensures proper calibration of the build surface, regardless of which type of build platform is installed.
  
• Supports single and dual extrusion modes
• Built-in Camera – watch the M300 Dual print from your computer
• Zortrax Z-SUITE 2 Software
• Connect to multiple M300 Dual printers using Z-SUITE 2’s Wi-Fi module to create a 3D printing network capable of tackling the most ambitious manufacturing and prototyping projects
• Monitor and manage all of your connected Zortrax printers from one screen
• Tabbed projects allow for working on multiple project simultaneously
• Zortrax material profiles for the highest quality 3D printing with Z-FILAMENT materials
• Supports slicing for third-party materials
• Thin wall detection helps to spot problems before starting the 3D print project
• Editable supports allow for full control over support structure. Adjust the automatically generated support or manually add support if needed.
• Cloud-based workflow management with Zortrax inCloud – inCloud is a professional management tool that allows you to access and monitor all of your Zortrax devices wherever you are (paid subscription may be required for some features)
• Remotely send commands to your printers
• Get notifications about the printing process
• Transfer and manage files on the printer’s USB drive
• Access to printing process history
• Control multiple devices at once to enhance your production workflow
• Manage users and teams

 

Zortrax M300 Dual with Zortrax HEPA Cover Add-On:

Zortrax HEPA Cover is a filtering device compatible with Zortrax M300 Dual 3D printer. With Zortrax HEPA Cover attached, it’s possible to maintain higher temperatures inside the M300 Dual’s printing chamber which significantly reduces shrinkage of ABS-based materials. HEPA filters catch over 99% of 3D printing emissions, including ultra fine particles, while carbon filters work to reduce unpleasant smells to ensure safe and smooth operation of a 3D printing farm.

Zortrax HEPA Cover solves following issues:

• Maintains stable temperature inside the printing chamber to reduce warping of ABS-based materials
• Carbon filter eliminates unpleasant smells
• HEPA filter catches over 99% of 3D printing emissions, including ultra fine particles
• Electric fan with regulated speed

ZORTRAX M300 DUAL SPECIFICATIONS:

DEVICE FEATURES
Build volume	265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in)
Material diameter	1.75 mm (0.069 in)
Nozzle diameter	0.4 mm (0.016 in)
Connectivity	USB, Ethernet, WiFi
Extruder	Dual material extruder with material jam detection
Extruder cooling system	Two fans cooling the extruder, radial fan cooling the print
Hotend	Dual material hotend
Material runout	2 x Mechanical endstop
Platform	Heated
Support	Mechanically removed – printed with the same material as the model / Dissolvable – printed with a different material than the model
Materials (single extrusion)	Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA, Z-NYLON
Materials (dual extrusion)	Z-PETG, Z-PLA, Z-ULTRAT Plus, Z-SUPPORT Premium
External materials	Applicable
Platform leveling	Automatic measurement of platform points height/Manual measurement of platform points height
Touchscreen	4″ IPS 800×480
In the box	3D Printer, Side Covers, Z-SUITE, Starter Kit, 2 spools of material (Z-PETG, Z-SUPPORT Premium), 1xPerforated Plate, 1xGlass Plate, 2 spoolholders, Material Box
PRINTING
Technology	LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures
Layer resolution	100-300 microns (for 0.4 mm/0.016 in nozzle)
Minimal wall thickness	400 microns (for 0.4 mm/0.016 in nozzle)
Maximum printing temperature (extruder)	310° C (590° F)
Build platform	Heated
Processor	Quad Core
Operation system	Android
Maximum platform temperature	105° C (221° F)
Ambient operation temperature	20° – 30° C (68°-86° F)
Storage temperature	0° – 35° C (32°-95° F)
AC input	110 V ~ 5.9 A 50/60 Hz 240 V ~ 2.5 A 50/60 Hz
Maximum power consumption	400 W
SOFTWARE
Software bundle	Z-SUITE 2
Supported file types	.stl, .obj, .dxf, .3mf
Supported operating systems	Mac OS X / Windows 7 and newer versions

Zortrax M300 Dual Main Features

• Works in the LPD Plus dual-extrusion technology
• Has a 265x265x300 mm workspace 
• Has Wi-Fi, USB, and Ethernet connectivity
• Has a blackout response system
• Calibrates a build-platform with a capacitive displacement sensor
• Compatible with various build platforms
• Supports single and dual extrusion modes 
• Works with third-party filaments

The LPD Plus technology designed for BIG industrial-grade results.

With dual-extrusion technology, the model and water-soluble support structures are built simultaneously. Printing movable and intricate designs is possible, as all support structures will dissolve in water.

Functional power tool handle. 

Human lumbar vertebrae. 

Fishing reel. 

Intricate piping connector.

Gear mechanism.

Print as you want

Various types of build platforms and a wide range of third-party filaments are fully supported. Not being limited to a single supplier allows choosing the setup perfectly tailored to the task at hand.

Minimizing human error

The M300 Dual is an efficient time-saving device fitted with advanced sensors to oversee the 3D printing process from start to finish with almost no supervision required.

No more failed prints

The printer can reduce time lost due to power outages and various kinds of mechanical failures. In such cases the print is automatically paused and can be resumed right after the issue has been dealt with.

Industrial-quality results from desktop 3D printer

Large workspace

Its large workspace measuring 265x265x300 mm is sufficient to print big models in one go.

Dual-extrusion system

The LPD Plus technology works with two nozzles and a double hot-end.

Blackout response system

The M300 Dual can detect a power outage and resume the printing from the same spot when the power is back on.

Capacitive sensor

The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.

Advanced filament control

The M300 Dual automatically pauses the print when the filament’s jammed, run out, or when the nozzle got clogged.

External materials support

Third-party filaments available on spools are fully supported in both single and dual extrusion modes.

Large format models made with a desktop-sized 3D printer

Step 1 Design

You can design models in all types of CAD software that support exporting files to .stl and .obj format or simply download them from the many online libraries.

Step 2 Print

Z-SUITE can send an already pre-processed model to one or more of your printers over Wi-Fi or Ethernet network.

Step 3 Remove supports

Water-soluble support filaments can be easily removed by rinsing. A dedicated Z-SUPPORT Premium dissolves quickly and leaves no remnants on the model.

Step 4 Go forward

Once the supports are removed, the model can work as a functional prototype or an end-use part in various industries.

Scaling up to 3D printing farms

The Zortrax M300 Dual’s wireless connectivity enables you to build a large cluster of remotely controlled 3D printers. Besides Wi-Fi, multiple M300 Dual 3D printers can also be networked through Ethernet or USB ports.

Connect

3D printing networks can be made by connecting multiple printers into large manufacturing clusters.

Manage

Z-SUITE is an efficient 3D printing farm management tool. 3D printers can be chosen to divide the workload between the devices.

Check

Monitor the 3D printing process using cameras installed inside each one of the printers.

Main features of Z-SUITE 2 for dual-extrusion technology

Z-SUITE is a dedicated slicing application that also works as a wireless command center of smart, reliable Zortrax 3D printers with Wi-Fi capability. It has a variety of functionalities enhancing the experience of using Zortrax M300 Dual.

Raft-free 3D printing

Z-SUITE 2 supports raft-free 3D printing. A glass build platform is recommended for this option.

Rotation optimization tool

The model’s position on the build-platform can be optimized to reduce support or printing time.

Replication

Models can be easily replicated to fit multiple parts of the same design on the build platform.

Thin wall detection

Z-SUITE 2 highlights the walls too thin to be printed properly to prevent failed prints.

Specs

Device
Build volume	265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in)
Nozzle diameter	0.4 mm (0.016 in)
Extruder	Dual, printing with model and support material
Extruder cooling system	Two fans cooling the extruder; radial fan cooling the print
Hotend	Dual
Platform	Heated; various platforms are applicable (e.g. perforated or glass)
Material Endstop	2 x Mechanical
Connectivity	Wi-Fi, Ethernet, USB
Operating system	Android
Processor	Quad Core
Touchscreen	4″ IPS 800×480
Camera	Yes

 

Printing
Technology	LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures
Layer resolution	150-200 microns
Minimal wall thickness	400 microns
Platform leveling	Automatic measurement of platform points’ height / manual measurement of platform points’ height

 

Temperature
Maximum printing temperature (extruder)	310° C (590° F)
Maximum platform temperature	105° C (221° F)
Ambient operation temperature	20-30° C (68-86° F)
Storage temperature	0-35° C (32-95° F)

 

Filaments
Dedicated for single extrusion	Z-NYLON, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA
Dedicated for dual extrusion	Dedicated for dual extrusion
External filaments	Applicable
Support	Mechanically removed – printed with the same material as the model / Water-soluble – printed with a different material than the model
Filament container	Spool
Filament diameter	1.75 mm (0.069 in)

 

Electrical
AC input	110 V ~ 5,9 A 50/60 Hz ; 240 V ~ 2,5 A 50/60 Hz
Maximum power consumption	400 W

 

Software
Software bundle	Z-SUITE
Supported file types	.stl, .obj, .dxf, .3mf
Supported operating systems	Mac OS up to Mojave version / Windows 7 and newer versions

 

In the box
3D Printer, Side Covers, Z-SUITE, Starter Kit, Z-PETG, Z-SUPPORT Premium, 1x Perforated Platform, 1x Glass Platform, 2x Spool holders, Material Box, USB memory stick

About Zortrax

**ALL CUSTOMERS FROM THE FOLLOWING STATES WILL RECEIVE A SEPARATE SALES TAX INVOICE AFTER PURCHASE DUE TO Zortrax USA DISTRIBUTORS HAVING NEXUS IN THESE STATES***

Alabama Arkansas Arizona California

Colorado Connecticut Florida

Georgia

Hawaii

Idaho

Illinois

Indiana

Iowa Kansas

Kentucky

Louisiana Maine

Maryland Massachusetts

Michigan

Minnesota

Nebraska

Nevada

New Jersey New Mexico

New York

North Carolina

Oklahoma Ohio

Pennsylvania

South Carolina Tennessee Texas

Utah

Virginia

Washington

Wisconsin

 

Zortrax

Zortrax is a Polish developer of comprehensive 3D printing solutions. It has built a strong position on the global market of desktop 3D printers, while also offering dedicated filaments, Z-SUITE software and additional devices to improve the printing process and post processing.

The company uses innovative solutions and high quality materials to focus on providing precision of printing primarily to business professionals. At the same time, thanks to their ease of use, financial availability and unique design, Zortrax 3D printers are also chosen by individual clients – prosumers and amateurs alike.

Therefore, Zortrax products are used by thousands of customers around the world in a wide range of industries, such as architecture, medicine, automotive, engineering, industrial prototyping, or fashion.

Zortrax offers its products through a network of over 130 Partners operating in 90 countries around the world on six continents, including the largest markets in Europe, the Americas, Asia, Africa and Australia. The company and its products receive a lot of positive feedback from users and have garnered multiple awards in the 3D printing industry.

ORDER CONFIRMATION